課程專區

category

地震工程University course

課程名稱: 地震工程
  • 學分: (下) 3
  • 課程碼: N658700
  • 必/選修: 2
  • 授課語言: 1
  • 授課教師: 朱世禹
  • 課程大綱:

歷年開課

課程目標:

本課程首先介紹地震的成因、實際資料量測處理方式與結構震災破壞型式,並根據歷年地震記錄進行地震危害度分析;基於結構動力學的基礎,進行地震反應譜之建立,除了介紹現行結構耐震分析與設計之規範,並將要求學生選定題目並應用結構分析軟體進行實際結構之地震力分析與設計;期能使學生具有結構耐震分析與設計之能力。


課程內容概要:

Introduction
Cause of Earthquake: Basic Terminology in Earthquake Engineering
Seismic Hazard Analysis in a Given Zone
Estimation of Design Ground Motion
Elastic Response Spectrum: Design Response Spectra of Ground Motion
Seismic Analysis of Structural Responses
Seismic Design Building Codes
Static Lateral Force Procedures
Comparison of Dynamic Analysis with Static Procedures


成績計算方式:


(a) Midterm Exam....................................................................................... 30%
(b) Final Project .......................................................................................... 40%
(c) Home Works.......................................................................................... 30%


教科書或主要參考書:


(a) Dowrick, David J. (1988), Earthquake Resistant Design – For Engineers and Architects, 2nd ed., John Wiley & Sons, New York.

(b) Kramer, Steven L. (1996), Geotechnical Earthquake Engineering, Prentice -Hall, New Jersey.

(c) Chopra, A.K. (2001), "Dynamics of Structures - Theory and Applications to Earthquake Engineering", 2nd ed., Prentice Hall, New Jersey.


建議先修基礎課程:結構動力學,須使用程式語言(Fortran/C/Matlab)撰寫作業與報告。
Office Hours: 8:10~9:00a.m. Fridays. Other hours are available by appointment.


適合選修對象:

A.甲組博碩學生


建議先修基礎課程:

結構動力學,程式語言